The machine as it sits.
![Image](http://i907.photobucket.com/albums/ac274/jakesrocks/Missing%20agate/New%20Projects/000E1744_zpsca2cedd0.jpg)
One of the 5 convex wheels.
![Image](http://i907.photobucket.com/albums/ac274/jakesrocks/Missing%20agate/New%20Projects/000E1691_zps309d14a2.jpg)
3/4" id X 1/8" thick nylon spacers to set the space between wheels.
![Image](http://i907.photobucket.com/albums/ac274/jakesrocks/Missing%20agate/New%20Projects/000E1761_zpsb5dda183.jpg)
The plans are to fill the existing holes in the hood with Devcon Liquid Steel, and to re drill the hood for 5 needle valves, so each wheel is centered under a valve. I have all of the needed plumbing pieces, and a brand new 1/4 HP motor which should be enough to spin this machine. I'll add pics as work progresses.