ABI Pulse Arc Mini III Jewelry Welder

Buying and selling of general items

Moderators: PinkDiamond, John

Chaplin37
Posts: 5
Joined: Fri Aug 12, 2016 4:11 pm

ABI Pulse Arc Mini III Jewelry Welder

Post by Chaplin37 »

Good morning everyone,

I'm selling my ABI Pulse Arc Mini III Jewelry Welder with a lot of accessories and it only has been used a couple of times. I'm selling it for a really good price, if you buy it off of the ABI website it would cost you $2700, im selling mine for only $1000. It has everything that one on the ABI website has except for the pen holder, which only costs $17.00 through them. I really don't want to sell it but I need the money. Here is the link as I have put it up on ebay

http://www.ebay.com/itm/172312007134?ss ... 1555.l2649
User avatar
PinkDiamond
Posts: 15402
Joined: Thu Jun 04, 2015 9:30 pm
Location: Ozark Mountains

Re: ABI Pulse Arc Mini III Jewelry Welder

Post by PinkDiamond »

Warmest welcome to the forum Chaplin. That's an awesome deal and I hope you get what you want out of it, although it's too bad you need to sell it. Good luck, and welcome aboard! :D
PinkDiamond
ISG Registered Gemologist


· ´¨¨)) -:¦:-¸.·´ .·´¨¨))
((¸¸.·´ ..·´ There are miracles left for you to do .... -:¦:- -:¦:-
-:¦:- ((¸¸.·´* It all begins inside of you. ;)
User avatar
opalcreations
Posts: 624
Joined: Thu Jun 04, 2015 4:01 pm
Location: Nova Scotia, Canada

Re: ABI Pulse Arc Mini III Jewelry Welder

Post by opalcreations »

Welcome Chaplin!

Glad to have you aboard.
Chris :)
User avatar
PinkDiamond
Posts: 15402
Joined: Thu Jun 04, 2015 9:30 pm
Location: Ozark Mountains

Re: ABI Pulse Arc Mini III Jewelry Welder

Post by PinkDiamond »

That's a great deal Chaplin, I'm surprised to see no bids on your welder yet. If I had the money I'd take it myself and give repairing my own jewelry a try, but alas, being retired all these years isn't conducive to making large unplanned purchases; especially since I just had to spend as much to replace my gas range after my husband lifted the top and tried to clean it. :?

I wish more people would pop in and see your offer because it's a great deal, and I sure hope you get some bids on it soon. ;)
PinkDiamond
ISG Registered Gemologist


· ´¨¨)) -:¦:-¸.·´ .·´¨¨))
((¸¸.·´ ..·´ There are miracles left for you to do .... -:¦:- -:¦:-
-:¦:- ((¸¸.·´* It all begins inside of you. ;)
Chaplin37
Posts: 5
Joined: Fri Aug 12, 2016 4:11 pm

Re: ABI Pulse Arc Mini III Jewelry Welder

Post by Chaplin37 »

Thanks PinkDiamond, Yes I'm also surprised that there have been no bids. It is a really nice machine, wish i could keep it and also wish I could sell it for more then what im selling it for, but I had no bites on it when it was set to 1500.00. If I don't get any bids soon I probably will just take it down and try again in the near future.
Chaplin37
Posts: 5
Joined: Fri Aug 12, 2016 4:11 pm

Re: ABI Pulse Arc Mini III Jewelry Welder

Post by Chaplin37 »

Hi PinkDiamond, I received your message in my inbox, but Im not able to reply to you.
User avatar
PinkDiamond
Posts: 15402
Joined: Thu Jun 04, 2015 9:30 pm
Location: Ozark Mountains

Re: ABI Pulse Arc Mini III Jewelry Welder

Post by PinkDiamond »

That was because you needed to get past the first 2 posts being screened before approval. You have full run of the forum now. :)
PinkDiamond
ISG Registered Gemologist


· ´¨¨)) -:¦:-¸.·´ .·´¨¨))
((¸¸.·´ ..·´ There are miracles left for you to do .... -:¦:- -:¦:-
-:¦:- ((¸¸.·´* It all begins inside of you. ;)
Chaplin37
Posts: 5
Joined: Fri Aug 12, 2016 4:11 pm

Re: ABI Pulse Arc Mini III Jewelry Welder

Post by Chaplin37 »

If anyone is still interested in this I still have it for sale on ebay

http://www.ebay.com/itm/172336065128?ss ... 1555.l2648
User avatar
PinkDiamond
Posts: 15402
Joined: Thu Jun 04, 2015 9:30 pm
Location: Ozark Mountains

Re: ABI Pulse Arc Mini III Jewelry Welder

Post by PinkDiamond »

Sorry to hear it hasn't sold yet Chaplin. It's such a good deal it's hard to believe that nobody has scarfed it up yet! Have you tried advertising it in a trade magazine? I would think that on fleabay you're getting lost in the sea of sellers, but in a trade magazine I think you could get noticed easier, and it might prompt someone who wasn't even planning to buy a welder right now to jump at the chance to take advantage of such a good deal. You might check on advertising in JCK magazine, or even look for jewelry-making schools to zero in on your target audience. It just makes sense and would probably sell quickly and solve your problem. Best of luck with it. ;)
PinkDiamond
ISG Registered Gemologist


· ´¨¨)) -:¦:-¸.·´ .·´¨¨))
((¸¸.·´ ..·´ There are miracles left for you to do .... -:¦:- -:¦:-
-:¦:- ((¸¸.·´* It all begins inside of you. ;)
User avatar
kjsspot
Posts: 1185
Joined: Fri Jun 05, 2015 12:22 am
Location: West Fargo, ND
Contact:

Re: ABI Pulse Arc Mini III Jewelry Welder

Post by kjsspot »

I'd love to buy it but it's the wrong time for my $$ wise as I just bought a house.
~KJ~
Mysterious opals contain the wonders of the skies - sparkling rainbows, fireworks, and lightning, shifting and moving in their depths.
ETSY: http://www.etsy.com/shop/KJOFineArt
Website: http://www.kjmontoya.com
Post Reply